TeeJet 844-R Speed Compensated Application Control User Manual
Page 11
98-05047
11
R0
N
O
F
LOW
A
LARM
If the 844-R stops receiving pulses from the flow meter
The turbine symbol flashes at the
top of the display.
This alarm indicates that there is a
problem with the flow meter or cabling.
F
LOW RATE
F
EATURE
The 844-R Sprayer Control measures a flow rate moving through the flow meter
in GPM {Imp GPM}. This feature is activated by pressing and holding the
key
while spraying in the normal operating mode. The flow rate display replaces the
area/volume display in the lower right portion of the display.
Any time the
key is pressed while
spraying in the normal mode the flow
rate is displayed. Releasing the
key
causes the display to return to
area/volume.
This feature can be used for tip
calibration or for calibrating the flow
meter. Refer to page 19 of this manual
for the flow meter calibration
procedures.
GPA
0.0
0
4.8
32.50
Ac
MPH
PSI
This alarm occurs only when the
Master boom switch is “ON”.
GPA
2.0
15
0.0
8.7
MPH
PSI