TeeJet LH 85 - Manual (Page 33)

O PERATORS MANUAL FOR THE LH 85 S PRAY C ONTROLLER S ETTINGS
LH A GRO 4.9
Step Key Action
6 Press the ENTER key.
7 Press the "Simulate On" key to switch speed simulation on.
8 Press the JOB key to return to the main operation screen.
9 Press the "High speed" key to set the simulated speed to
the above encoded speed.
10 Press the "Low speed" key to set the simulated speed to
the above encoded speed.
To switch simulated speed off return to the "Simulated Speed" menu and switch
simulated speed off, or select a different speed source.
FLOW
This menu is for "tweaking" the flowmeter calibration figure. There are two
methods for correcting the flowmeter calibration from this menu:
• Automatic flowmeter correction
• Manual flowmeter correction
This "fine tuning" should not be confused with the initial flowmeter calibration
which is described on page 4.16.
Job