TeeJet CenterLine 2.0 - Manual (Page 28)

22 CenterLine
CenterLine Setup
CenterLine
Software Version 2.00
Alarm
The <ALARM> setting, when set to ON, notifies the operator when entering a previously applied
area. The text window displays <APPLIED> when the implement swath is in a previously applied
area of the field.
To adjust the Alarm setting, go to Guidance setup, scroll until <ALARM> is displayed in the text
window, and press enter. Using Up or Down, scroll between the <ON> and <OFF> settings until
the desired setting is displayed in the text window. Press Enter to save the setting and return to
the Guidance setup menu.
Figure 27: Setting the Alarm
Setting Description
Off No applied area detection.
On Applied area detection alarm.
Table 5: Status Detect Settings