TeeJet CenterLine User Guide v2.02 - Manual (Page 19)

CenterLine 2.02
98-05054 R6
15
Figure 2-21: 1 Hz MSG Setting
Table 2-7: 1 Hz MSG Settings
Lightbar
Lightbar setup allows the selection of several parameters related to the lightbar. There are five light-
bar settings:
• Drive Sensitivity <SPACING>
• Display Mode <MODE>
• Messages <TEXT 1> and <TEXT 2>
• Steer Bar <STEER BAR>
Figure 2-22: Lightbar Setup Flow
Setting Description
Yes When the data rate of the GPS receiver is set to 1 Hz, a <GPS SLOW> message is sent to the
lightbar and the guidance function is disabled.
No When the data rate of the GPS receiver is set to 1Hz, a <GPS SLOW> message is sent to the
lightbar when the operator first begins operation, but guidance is allowed.
Yes 1 Hz MSG
No
Spacing Lightbar
Mode
Text 1
Text 2
Steer Bar
Next
To Start