TeeJet Matrix 840G User Manual - Manual (Page 17)

●
12
SYSTEM SETUP
System Setup is used to confi gure Lightbar, Culture,
GPS, Console and Video settings.
1. Select UNIT SETUP from Home Menu .
2. Press SYSTEM SETUP TAB .
3. Select from:
►Lightbar – used to confi gure LED Spacing, Display Mode
and LED Brightness
►Culture – used to confi gure Units, Language and Time
Zone
►GPS – used to confi gure GPS Type and the GPS Port, as
well as view GPS Status information
►Console – used to confi gure Volume, LCD Brightness,
Screen Calibrate and Screenshot settings, as well as view About
information and Save system software information
►Video – used to set up individual cameras
Figure 2-3: System Setup
Lightbar
Lightbar Setup is used to confi gure LED Spacing, Display/Swath
Mode and LED Brightness.
1. Press SYSTEM SETUP TAB
2. Press LIGHTBAR ICON .
3. Select from:
►LED Spacing – sets the distance illustrated by the
illuminated LEDs
►Display Mode – determine whether the lightbar represents
the swath or vehicle
►LED Brightness – adjust LED brightness
OR
Press PAGE RIGHT ARROW to cycle through all settings.
NOTE: Options labels are current settings. While in a setting screen,
press icon to view available factory settings and setting
ranges.
Figure 2-4: Lightbar Options
LED Spacing
LED Spacing sets the distance illustrated by the illuminated LEDs.
Range is 0.01 - 3.0 metres.
1. Press LIGHTBAR ICON .
2. Press LED SPACING ICON .
3. Use the entry screen to establish LED Spacing.
4. Press
►PAGE RIGHT ARROW to proceed to Display Mode.
►SYSTEM SETUP TAB to return to main System Setup
screen.
Figure 2-5: LED Spacing