TeeJet RX 400p - Manual (Page 79)

RX 400p
4-37 98-05044
R1
GPGST@ Off
This menu item allows you to toggle the output of
the GPGST message through the MAIN port of the
RX 400p receiver. To change the current update
rate, press the
button followed by adjusting the
rate using the or key, then press . This
message may be set for output at 1 Hz only.
GPGSV@1 Hz
This menu item allows you to toggle the output of
the GPGSV message through the MAIN port of the
RX 400p receiver. To change the current update
rate, press the
button followed by adjusting the
rate using the or key, then press . This
message may be set for output at 1 Hz only.
GPRMC@ 1 Hz
This menu item allows you to toggle the output of
the GPRMC message through the MAIN port of the
RX 400p receiver. To change the current update
rate, press the
button followed by adjusting the
rate using the or key, then press . This
message may be set for output at 5 Hz, 1 Hz, 5 s
updates or may be turned off.