TeeJet FieldPilot Install Case SPX 3150-3185 - Manual (Page 10)

9
FieldPilot ®
98-05154 R1
1. PrePare the FieldPilot ValVe
Install fitting (S) in the A and B ports of the FieldPilot Valve (C) . Install fitting (O) in the T port. Install fitting (R)
in the P port. Install fitting (R) in the EF port. Attach fitting (P) to fitting (R) in the P Port.
Figure 1-4: Preparing the FieldPilot Valve
2. install the FieldPilot ValVe Bracket
Remove the two bolts on the left side of the orbital and then using the same bolts attach bracket (H) to the orbital
bracket.
Figure 1-5: Installing the FieldPilot Valve Bracket
H
s
p
R
o
R