TeeJet FieldPilot Install John Deere 9x00-9x20 - Manual (Page 17)

13
FieldPilot ®
98-05217 R3
2. install the FieldPilOt ValVe Bracket
Locate the holes on the left side of the rear portion of the tractor as shown. Select the hole shown and mount the
valve bracket (K) using bolt (H) , washer (B) and nut (J) .
Figure 1-8: Installing the Mounting Bracket for the FieldPilot Valve
H, B, J
K
3. MOunt the FieldPilOt ValVe
Use bolts (G) , washers (B) and nuts (J) to mount the FieldPilot valve (C) to the bracket (K) . Mount the valve
with the electronic connections up, the Pressure, Tank and Load sense adapters should be facing the rear of the
tractor and the A and B adapter should be facing the front of the tractor.
Figure 1-9: Mounting the FieldPilot Valve
G, B, J