Fieldpilot, Xbb, cc then x, Xbb, cc then x cc bb – TeeJet FieldPilot Install John Deere 9x00-9x20 User Manual
Page 22
Advertising
18
www.teejet.com
FieldPilot
®
Version V2 & V3
Remove the two plugs or test ports from the T and P ports. Install adapters
(X)
in the T & P ports. Remove the
plug from the LS port, and insert shuttle disc
(BB)
in the LS port. Then insert with threaded end up the spacer
(CC)
into the same LS port. Finally, install adapter
(X)
in the LS port.
Figure 1-18: Preparing the SCV Stack
X
BB, CC
then X
X
BB, CC
then X
CC
BB
Advertising