ThermoWorks TR-73U 2 CHANNEL LOGGERS WITH USB - Manual (Page 31)

22
Setting Recording Interval from Main Unit
Button
You can make or change recording interval settings from the <INTERVAL> button on the
front of the TR-73U main unit.
*During recording or while waiting for a programmed recording to start via the provided software, there
are not settings to be made.
<INTERVAL>
button
1.
Press in the <INTERVAL> button on the front of the device until the recording
interval appears in the display.
2.
With each pressing of the <INTERVAL> button the recording interval time will
change.
Press until the desired setting appears.
Recording Interval
1,2,5,10,15,20,30 seconds / 1,2,5,10,15,20,30,60 minutes
15 seconds 15 minutes
3.
When the desired recording interval appears, stop pressing the <INTERVAL> button.
Within a few seconds, the current measurement readings will return to the display
and the setting will be fi nished.
*By pressing the <INTERVAL> button during recording or while waiting for a programmed recording
to start via the provided software, the currently set recording interval will be displayed.