ThermoWorks 226-270 DATA TEMPERATURE RECORDER - DTR Software Manual - Manual (Page 10)

10
DEFINING THE LABELS AND LIMITS - DTR
The DTR has 1 input and up to four labels can be defined for use. These labels
can each have their own high and low limits.
Each reading taken by the device is assigned the label selected at the time. The
reading’s alarm state is determined by its label’s high and low limits.
To change the name of a label and its limits, click on the Labels field on the ticket
layout area.
Radio buttons on the left determine the selected label on instrument start-up.
The high and low limits are selected from the drop-down boxes. The high limit
must be greater than the low limit and vice-versa.