Tie Down LP750 - Manual (Page 12)

1A
1A
6
1C
1B
1A
1A
1A
1A & 4
1A & 4
1A
Set Screw - See Note Below
2
3
Model LP750
“Open-4 screws on top”
Master Cylinder
Model LP750
“Smooth top”
Master Cylinder
5
7
2
Page 12
Model LP750 Replacement Parts
Model LP750
7,500 lbs. Capacity
Smooth Top Models
Part #70489 Disc Brake, Bolt On
Part #70486W Disc Brake, Weld On
Part #70486SW Disc Brake, Swing Tongue
Set Screw Note:
The Set Screw provided in the bottom of the actuator housing should be
adjusted to contact the flat provided on the master cylinder casting then
backed off 1/4 turn and locked in that adjusted position by tightening the
jam nut provided.