Tie Down Bench Structure - Manual (Page 3)

TIE DOWN ENGINEERING • 255 Villanova Drive SW • Atlanta, GA 30336
www.tiedown.com (404) 344-0000 Fax (404) 349-0401
020513,A1303
Bench Seating and Arm Rest Components
NOT INCLUDED
Bench Seat and Back Rest Panels
This pattern is for receivers and bench support structures mounted on 3 foot centers
Arm Rest Panels
Secure to bench frame left (#1)and right (#2) with 4 - 1/4" x 2.75" flat head machine screws and 1/4" nyloc nuts.
Mount on arm rest brackets with 3.5" end facing forward.
Secure to arm rest brackets (#4) with 2 - 1/4" x 1.5" flat head machine screws and 2 - 1/4" nyloc nuts.
Part
#08189
Qty Size
4 2x6 by 60"
Qty Size
2 1x4 by 12”
2 x 6 x 60” Wood or Composite Material
36” 12”
4”
12”
5/16” dia.
12”
4”
1.75” 6.75” 3.5”
5/16”
Shopping List
2 2 x 6 by 10' Wood or Composite Material
1 1 x 4 by 2' Wood or Composite Material
16 1/4" x 2.75" Flat Head Machine Screw
4 1/4" x 1.5" Flat Head Machine Screw
20 1/4" Nyloc Nut
Tools Required
Pencil
Tape Measure
Saw
Drill Motor
1/4" Drill Bit
Round Countersink Drill Bit
Sand Paper and Sander
Philips Screw Driver
7/16 Wrench or Socket