CREATIVE Sound Blaster Audigy 2 Platinum eX - Manual (Page 67)

Troubleshooting and FAQs B-7
i. Click the Bank button.
The Configure Bank dialog box appears.
ii. Click the Select Bank drop-down button, and select a bank index.
iii. Highlight the bank and click the Remove button.
iv. Click the OK button to finish configuring your banks.
❑ Load smaller SoundFont banks instead; or add more RAM to your system.
Do one of the following:
• In the Configure Bank dialog box of Creative SoundFont Bank Manager, select a smaller
SoundFont bank, if available, from the Select Bank box.
• Increase the system RAM on your computer. For more details, visit the www.soundblaster.com
site for technical help.
Note: The amount of SoundFont cache you can allocate depends on the system RAM available. Your
computer may slow down if the amount of cache allocated is too high.
Problems with
the Joystick The joystick port is not working.
The audio card’s joystick/MIDI connector may be conflicting with the system’s joystick port.
To solve this problem:
Disable the audio card’s joystick/MIDI connector and use the system port instead. Do the following:
1. Click Start -> Settings -> Control Panel.
2. In the Control Panel window, double-click the System icon.
3. In the System Properties dialog box, click the Device Manager tab.
4. Double-click Sound, Video And Game Controllers, and then select Creative Audigy 2 Gameport
(Creative Game Port for Windows 2000).
5. Click the Properties button.
6. In the Properties dialog box:
If you have an Original Configuration (Current) check box:
The trade-off of a smaller
SoundFont file is its lower
sound quality.