Tii HNX-ET - Manual (Page 21)

P/N: 92226802
Rev A 5/08
21
Figure 6
The “Set Local Device only“button is used to change the network name (network password) for
the local device only. After doing this, all the devices seen on the Main panel prior to this will no
longer be able to communicate or respond to the computer, as they will be on a different logical
network. Devices previously set up with the same logical network (same network name) will
appear in the device list afterward selecting this option.
The “Set All Devices “button is used to change the logical network of all devices that appear on
the Main panel. The user must have entered the Device Password in order to set it to the new
logical network. A notification message will appear to report the success of this operation.
Note…
Changing the network name to any other name other than “HomePlug” will show
the network type on the main screen as Private. The Network Name is between 4
to 24 characters.