Figure 3 – Tii 605 Series User Manual
Page 4
Advertising
TII P/N: 92221501
5.0 ADX-5T Terminal Block Installation
5.1 Select the proper mounting configuration in the terminal housing for the desired terminal block
locations (See Figure 3).
Note: Feed hole for the Terminal Block Tails is larger and sits to the far left.
Note: Any combination can be configured up to 50 pair.
5.2 Feed terminal block stub through appropriate hole(s) in box leading to the splice chamber.
5 PAIR BLOCK
10 PAIR BLOCK USING TWO 5 PAIR BLOCKS
15 PAIR BLOCK USING THREE 5 PAIR BLOCKS
20 PAIR BLOCK USING FOUR 5 PAIR BLOCKS
25 PAIR BLOCK USING FIVE 5 PAIR BLOCKS
Figure 3
Terminal Block Stubs In Splice Chamber
Model 605-5
Advertising