TL Audio Fat Track - Manual (Page 22)

21
SPECIFICATIONS
2 Input Channels (figures quoted to Direct Outputs with Fader at maximum):
Line Input:
Balanced, via 3 pin TRS jack.
Nominal Level +4dBu, Gain range +/-20dB.
Frequency Response 10Hz to 40KHz, +/-0.4dB.
Maximum Input Level +22dBu.
Noise -83dBu unweighted, 22Hz to 22KHz.
Mic Input:
Balanced, via 3 pin XLR.
Gain range +16dB to +60dB (-14dB to +30dB with pad).
Input Noise (EIN) -127dBu, 22Hz to 22KHz @ 60dB gain,
Frequency Response 10Hz to 40KHz, +/-0.5dB, @ 40dB gain.
Maximum Input Level +6dBu (+36dBu with pad).
Switchable 48V Phantom Power.
Instrument Input:
Unbalanced 0.25” jack.
Nominal input -16dBu, Gain range +/-20dB.
Maximum Input Level +8dBu.
Frequency Response 10Hz to 40KHz, +/-0.5dB.
Noise -83dBu unweighted, 22Hz to 22KHz.
Direct Output:
Post EQ and Fader, Pre Mute Switch.
Balanced, via 3 pin TRS jack.
Nominal Level +4dBu.
Maximum Level +22dBu.
Mono Inputs:
Phase Reverse Switch.
Switchable High Pass Filter, -3dB @ 90Hz, 2nd order.
Equaliser:
“High” +/-15dB @ 10KHz.
“Mid” +/-15dB, swept 150Hz to 7KHz, Q =0.7.
“Low” +/-15dB @ 80Hz.
Tube Stage:
Pre EQ.
Drive LED:
Variable intensity, from 0dBu to +12dBu, indicating increasing
Tube drive. Distortion is predominately 2nd Harmonic,
increasing with Drive LED from 0.5% to 3% (typical).
Peak LED:
Illuminates at +19dBu.
Multiple point monitoring at Input stage and post EQ.
Insertion Point:
Post EQ, Pre Fader.