TL Audio 5052 - Manual (Page 34)

Q variable 0.7 to 7.
HF: +/-15dB, 3kHz to 20kHz.
Peak/Shelve response.
Q = 1.5.
Output/Limiter:
Output fader centre detented at 0dB.
Maximum gain +15dB.
Limiter post fader, threshold 0dBu to +20dBu.
Balanced output via XLR, +4dBu nominal level.
Unbalanced output via jack, -10dBu nominal level.
Stereo Operation:
Independent selection of Compressor, Equaliser and Limiter for stereo.
All selected controls stereo ganged, Channel 1 operates as master.
Metering:
Variable intensity “Drive” LED, illuminating over the range +6 to +16dBu.
“Peak” LED at +19dBu, monitoring the signal chain at multiple points.
Twin illuminated VU meters, switchable to Input Level, Output Level,
Compressor gain reduction and Limiter gain reduction.
10dB meter pad switch, effective when monitoring Input and Output levels.
Frequency Response:
Line: +0, -1dB, 10Hz to 40kHz.
Mic: +0, -2dB, 20Hz to 40kHz, @ 38dB gain.
Instrument: +0, -1dB, 10Hz to 40kHz @ 20dB gain.
Distortion:
THD+N typically 0.1% @ 0dBu, 10Hz to 40kHz.
THD+N typically 0.5% @ +12dBu, 10Hz to 40kHz.
Distortion is predominately second harmonic, increasing with