Toa CR-413-6 - Manual (Page 8)

Bind head taptite screw type B 4 x 10
Sub-frames
Note
Use these screw holes to secure the
sub-frame. (Similarly to the left side)
Step 3. Install the sub-frames.
Notes
• The name labels are not attached to the sub-frames. Also, there is no distinction between the left
and the right sub-frames.
• When using the supporting runners, the sub-frames must be installed.
Screws used Bind head taptite screw type B 4 x 10 ..... 4 pieces
8