Toa S-20S Ver.5.0 - Manual (Page 38)

38
12.2. Recording (except the EV-20S and S-20S)
Recordings can be made into selected audio data areas through PC activation. This results in the same
operation as when the Record key on the Sound Repeater is pressed.
Step 1. Click the button corresponding to the audio data are to be recorded into.
Note
If the Repeater is a PM-20EV, CHIME A (pre-announcement chime tone) and CHIME B (post-
announcement chime tone) cannot be recorded.
Step 2. Click the Rec button.
The confirmation dialog box is displayed.
Step 3. Click Yes. When the Sound Repeater's indicator changes from flashing to steady ON, start recording
from the microphone or connected CD player.
Note
The Sound Repeater's recording operation is the same as when the Repeater's Record key is pressed.
Use the indicator to confirm the start timing of the recording. (In the case of the PM-20EV, timing can
also be confirmed by means of a chime tone.)
Step 4. To stop the recording, click the Stop button.
2
1
4