Toa IR-700D - Manual (Page 4)

1. Power switch
Press this switch to turn on the power.
To turn off the power, press this switch again.
2. Power indicator
Lights when the power is switched on.
3. Cable Clip
Run the AC adapter cable through this clip to
prevent its plug from being removed.
4. DC inlet [DC IN]
Connect the supplied AC adapter.
5. Receiver mixing input terminals [IR IN]
Connect the infrared wireless receiver or the
distributor.
Up to 8 infrared wireless receivers can be
connected with the use of the optional YW-1022
(2-Branch Distributor) or the YW-1024 (4-Branch
Distributor).
6. Distribution output terminals [IR OUT]
Connect the IR-702T Infrared Wireless Tuner.
POWER
OFF
ON
IR IN
75 Ω
2 1 3
IR OUT
1 2 4
DC IN
24V 1A(max)
3 4 5 6
[Front]
[Rear]
1 2
4
2. GENERAL DESCRIPTION
The IR-700D is a receiver distributor used in the TOA’s infrared wireless microphone system.
It employs 4 receiver mixing inputs and 2 distribution outputs.
By using the IR-700D in conjunction with the IR-702T Infrared Wireless Tuner, up to 16 infrared wireless
receivers can be connected to the IR-702T.
3. HANDLING PRECAUTIONS
• Install the IR-702T as far as possible from fluorescent lights, digital equipment, PCs and other devices that
generate high-frequency noise.
• When cleaning, be sure to first switch off the tuner's power, then wipe with a dry cloth. If the tuner is
extremely dirty, use a cloth moistened in a neutral detergent. Do not use benzene, thinner, alcohol and
chemically-processed towels, as they can cause damage to the tuner's components and parts.
4. NOMENCLATURE AND FUNCTIONS
Cable clip
AC adapter plug