Toa IR-700D - Manual (Page 9)

9
[Example 2]
When installing both the infrared wireless receiver and distributor in the same location, make all "M" distances
(cable length between receiver and distributor YW-1022/1024) equal.
Notes
• To facilitate unification of coaxial cable lengths, it is recommended that wiring from the IR-700D to the
distributor YW-1022/1024 should be performed using a single cable.
• The use of coaxial cables cut to an even length that is slightly longer than required easily makes all "M"
distances of wiring in the ceiling identical.
8.3. Wiring Examples
[Example 1]
When installing multiple infrared wireless receivers in the same location, make all "N" distances (cable length
between receiver and IR-700D) equal.
M
M
M
M
N
Distributor YW-1022/1024
Infrared wireless receiver
BNC plug-to-BNC plug cord (supplied with the IR-700D)
Infrared wireless tuner Infrared wireless distributor
IR-700D
N N
BNC plug-to-BNC plug cord (supplied with the IR-700D)
Infrared wireless receiver
Infrared wireless tuner Infrared wireless distributor
IR-700D