Toa C-CH210FH - Manual (Page 17)

17
FOCUS ZOOM AUX FRAME
GROUND
F/H WIP DEF DOWN RIGHT LEFT AUTO-
PAN
UP LENS
-COM AC-
COM
CAMERA
AC24 V CAMERA
-COM
C-RB100 Coaxial Multiplex
Control Relay Box*
Control terminal block
Terminal (lower)
Terminal (upper)
C-CH210FH
13 VIDEO OUT
VIDEO OUT
12 VIDEO GND
VIDEO GND
10 ZOOM
9 FOCUS
8 IRIS
7 LENS COM
6 NC
11 NC
5 WIPER
4 DEF
3 CAMERA POWER
CAMERA POWER
2 AC HOT
1 AC COM
Inside of C-PH200
Junction circuit board terminal block (B)
Junction circuit board terminal block (A)
Coaxial shield
Coaxial core
Peach
White
Orange
Purple
Red
Gray
Blue
Yellow
Green
C-PH200 Outdoor
Pan/tilt Head*
To VIDEO terminal
Housing cable
Note
Take care not to connect the AC input to the video output.
If connected by mistake, the camera will fail.
1
2
3
4
5
7
8
9
10
12
13
1 2 3 4 5
6
7 9 10
12 1 2 3 4 7 5
8.3.2. When using the C-PH200 Outdoor Pan/tilt Head:
• When using the 100 VAC camera, it is not connected to and on the C-PH200’s terminal block (upper).
Connect the camera power supply directly to the 100 VAC wall outlet. (Power to the 100 VAC camera
cannot be supplied from the C-RB100.)
• If no motorized zoom lens is used, leave through on the C-PH200’s terminal block (upper)
unconnected
10 7
2 1
* For how to mount the C-PH200 and the C-RB100, refer to their respective instruction manuals.