Cambridge SoundWorks II - Manual (Page 14)

14
2) Using the MicroWorks II as a sound system for a
component CD player.
Typically, there are two RCA-type jacks (one red,
one white) on the CD player. To connect to these
jacks, obtain a stereo signal cable with two RCA
plugs on one end and a 3.5 mm stereo minijack at
the other end. Connect the RCA plugs to the RCA
jacks on the player. Connect the Volume On/Off
Control green miniplug to the minijack of the
adapter.
RIGHT LEFT
OUT
RIGHT LEFT
OUT
Signal Cable
One 3.5 mm stereo miniplug to two RCA plugs
COMPONENT CD OUTPUT
Signal Cable
One 3.5 mm stereo minijack to two RCA plugs
OR
Green miniplug from
Volume On/Off control
Green miniplug from
Volume On/Off control
Minijack to minijack adapter