Cambridge SoundWorks II - Manual (Page 15)

15 15 15 15
Speaker Connections
To connect the 2-meter speaker cables (two wires at
each end):
Push back the red speaker input tab on a satellite,
exposing the wire hole.
Fully insert one of the wires with a red band into the
wire hole and release the tab.
Repeat the procedure with the adjacent speaker wire
and the black speaker input tab on that speaker.
Connect the two wires at the other end of that same
speaker cable to the red and black “R” speaker input
tabs on the subwoofer. This satellite becomes the
Right channel satellite.
Repeat the preceding process to connect the other
satellite (making it the Left channel satellite).
AC Connection and Placement
Make sure the Volume On/Off Control is in in the Off
position.
Insert the small plug of the Power Adapter into the
Subwoofer POWER jack.
Connect the AC plug to a grounded AC receptacle.
Place the main speakers and the subwoofer in your
preferred positions, then use the Volume On/Off
Control to turn on the power.