Touchstone 80006 Forte Electric Fireplace - Manual (Page 3)

2
CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this
appliance must not be supplied through an external switching device, such as a timer, or connected to a
circuit that is regularly switched on and off by the utility.
UNPACKING AND TESTING APPLIANCE
Carefully remove the appliance from the box. Prior to installing the appliance, test to make sure the
appliance operates properly by plugging the power supply cord into a conveniently located 110-120 Volt
grounded outlet.
【Grounding Appliance】
This appliance is for use on 120 Volts. The cord has a plug
as shown in (A). An adapter as shown in (C) is available
for connecting three-blade grounding type plugs to two-slot
receptacles. The green grounding lug extending from the
adapter must be connected to a permanent ground such as
a properly grounded outlet box. The adapter should not be
used if a three-slot grounded receptacle is available.
To disconnect appliance, turn controls to off, then remove
plug from outlet.
WARNING:
Keep the front of the appliance through which the heat is
radiated at least 1 meter away from furniture, curtains and
other flammable objects at all time.
Never use an extension lead. The main cable must remain
at the back of the appliance and must not be in contact with
any hot elements.
【INSTALLATION】
Fireplace installation
W
all Mounting：
1.please refer to the location of A、B、C、D、E、F、G、H，You’ll need a ￠0.275”（7mm） drill ,and
use a hammer to thread the bulged screw tube into the hole till it is flat with the wall.
2.Use the self-tapping ST5x37to thread to the bulged screw tube with the “+” screw driver,keep the
distance 12mm from wall,in order to hang fireplace.
Build In：
1.Create the hole in the wall (size:36.7”Lx4.1”Dx25.3”H) before installing.
2.Refer I、J、L、K to install the fixed hole,You’ll need a ￠0.275”（7mm）drill ,and use a hammer to thread
ALWAYS unplug this fireplace before assembly, cleaning, or before relocating. Failure
to do so could result in electric shock, fire, or personal injury.
Warning