Touchstone 80006 Forte Electric Fireplace - Manual (Page 6)

5
Build in installation
1.Using the Philips Screw Driver"+" to take off the two screws in the front two sides,hold the glass and
push up,take off the glass,and lay at the safe place,in order to avoid accidental damage.then load the
fixing parts at the bottom
2.
Doing the test before installing,then insert the firebox into the hole.
3.Use the self-tapping ST5x37 to thread to the bulged screw tube with the “+” screw driver,Ensured that
the fireplace fixed on the wall and it can’t move.
Fixing parts