Triner Scale TS-PFS Users Guide - Manual (Page 15)

Triner Scale TS-PFS User’s Guide Triner Scale TS-PFS User’s Guide
14
BATTERY OPERATION
The TS-PFS scale is designed to operate 35 - 40 continuous
hours on a fully charged battery.
When the battery reaches approximately 80% discharge, the
low battery icon will flash for 25 minutes, followed by rapid
flashing for 5 minutes, then the system will power off.
Auto Off Feature
To conserve battery power, the scale will automatically power
off after 20 minutes of non-use.
Reserve Power Feature
This special feature enables the scale to be operated on
reserved battery power after it has shut down due to a low
battery condition.
After the scale has powered off, turning the unit back on will
access 5 additional minutes of battery powered operation.
During this time the battery icon will rapidly flash. Depending
on conditions such as ambient temperature and initial charge
in the battery, the reserve power feature can be used several
times before the reserve power is exhausted.
Charging the Battery
Using the included AC adapter, insert the low voltage jack
into the socket located on the front panel of the indicator
housing, and plug the 110 volt plug in to a standard 110 VAC
outlet. A period of 8 continuous hours is required to fully
charge the battery.
SUBSTITUTING ANY OTHER AC ADAPTER CAN DAMAGE
THE UNIT AND VOID THE WARRANTY.
To maintain a full charge in the battery, it is recommended
that the scale be plugged in to 110 VAC while not in use.
110 VAC OPERATION
The scale can be operated using the 110 VAC adapter/charger.
The adapter also maintains a full charge in the battery while
connected to the scale and 110 VAC.
It is not recommended than the scale be operated using an
extension cord longer that 75 feet, as the AC current in
excessively long cords can result in inconsistencies in the
scale’s operation.
KEY FEATURES
• Fully automated totalizing of weight and item count for
weighing sessions.
• Nonvolatile memory retains totalized weight and item
count, even in the event of power failure.
• Single, extra-large LCD display for largest possible
readout and longer operation when the scale is battery-
operated.
• Easily add one weight multiple times by pressing ADD
key while in any mode of operation.
• Easily subtract/backout weight by pressing SUBTRACT
key and placing item to subtract on weighing platfrom.
• Loud piezo electric beeper informs user with distinctive
alerts when:
• Scale is ready to weigh item
• Item on scale has been added to total
• Item on scale has been subtracted from total
• Outdoor operation features include:
• Weather proof
• Automatic zero tracking to compensate for wind
and vibration conditions
• High dB beeper is water proof and audible in
high ambient noise environments
• Stainless steel NEMA 4X washdown indicator
housing
• Reserve power after low battery shut down.
• Three operating modes to accommodate user’s
preference.
• Lightweight and easily portable.
• Shock absorbing neoprene rubber feet.
• Factory calibrated.
3