Triner Scale TS-PFS Users Guide - Manual (Page 9)

9
Triner Scale TS-PFS User’s Guide
USING THE SCALE
Weigh Session, Audible Alerts
A timesaving feature of the TS-PFS is an extra-loud beeper
that provides the following audible alerts during a weigh
session:
• ONE BEEP: item on scale has been added
• TWO BEEPS: scale is ready for next item
• THREE BEEPS:
- scale has put into subtract mode
- the item weighed has been subtracted
This feature allows the user to proceed through the weigh
session without having to look at the display to verify that
each item has been added, and that the scale is ready
for placing the next item on the weighing platform.
Weigh Session Example, Auto Add (Operating Mode 1 or Mode 2)
10
lb
- Power on.
- BEEP BEEP
indicates scale
is stable and on
zero.
Press and hold
RESET key to reset
the scale’s memory.
!
Mode 1
- Display shows totalized
weight of 0.0 lb
Mode 2
- Display shows item
weight of 0.0 lb
- Place item on
scale.
- BEEP
indicates
item has
been added.
Mode 1
- Display momentarily
shows item weight of 10.0
lb, then shows totalized
weight, which is also
10.0 lb
Mode 2
- Display momentarily
shows totalized weight of
10.0 lb, then shows item
weight, which is also
10.0 lb
15
lb
IMPORTANT!
8
OPERATING MODES, cont’d
Auto Add, Total Weight Displayed
(Mode 1)
This mode sets the default display to the totalized weight
in the scale’s memory.
During a weigh session, the display will momentarily show
the weight of the item on the platform, then revert to
displaying the totalized weight.
When the item is removed, the totalized weight remains
in the display. The annunciator arrow points to TOTAL WT.
To view the Item Weight (weight on the platform) at any
time, press the DISPLAY key.
To view the Item Count in the scale’s memory, press the
DISPLAY key to cycle through the displays.
Auto Add, Item Weight Displayed (Mode 2)
This mode sets the default display to the item weight
(weight on the platform).
During a weigh session, the display will momentarily show
the totalized weight, then revert to displaying the item
weight.
When the item is removed, the display shows 0.0 lb (weight
on the platform). The annunciator arrow points to ITEM
WT.
To view the Totalized weight at any time, press the DISPLAY
key.
To view the Item Count in the scale’s memory, press the
DISPLAY key to cycle through the displays.
Manual Add (Mode 3)
This mode turns off the scale’s automatic add function.
Pressing the ADD key while an item is on the scale platform
will add the item’s weight and count to the totalized
memory in the scale.
Triner Scale TS-PFS User’s Guide
15
lb
10
lb