Triner Scale T-1000 TELESET - Manual (Page 17)

29 28
Operator manual T-1000 TELESET
9 TELESET postage resetting
TELESET is a state-of-the-art remote postage
setting system. With TELESET, you load
postage directly into your postage meter without
leaving the office. After requesting a reset
through the keyboard, the entire procedure runs
automatically via an internal modem. Should you
ever have any questions or difficulties resetting
your meter, call the TELESET Data Center
hotline at (800) 40-RESET.
9.1 Resetting postage
It’s so easy to reset your meter. Before you
start, check how much postage you have
available by checking register one.
(Press the ‘R’ key once and the amount
available will appear in the display.)
When the resetting process is complete, you
can verify the amount reset by once again
checking register one. The new amount
displayed will equal the previous postage
available plus the amount reset.
RESETTING AN EXISTING AMOUNT
1. Make sure the meter is switched on and
connected to the phone outlet.
2. Type in your 8 digit PIN, (‘12345678’ in the
example) as shown on your meter ID card.
Confirm it with the white ‘TELESET’ key.
You are now in the TELESET mode.
TELESET postage resetting