Cross track error field (xtk), Other available fields on the bottom line, Groundspeed (gs) – Trio Avionics Pro Pilot User Manual

Page 21

Advertising
background image


Trio Pro Pilot Manual 3.8

21

Cross Track Error Field (XTK)

Cross Track Error Field (XTK) provides a distance
measurement in miles, tenths and hundredths of how far the
aircraft is positioned either right or left of the desired track
(DTK). The maximum value in this field is 9.99 miles.


A positioning symbol, immediately preceding the numerical data, indicates the "fly to" direction required
to null this error.

 If this symbol has its apex to the left (<), the autopilot will fly to the left to eliminate the error.

 If the symbol has its apex the right (>) the autopilot will fly to the right to eliminate the error.

Here the aircraft is just .02 miles to the right of the desired
track, so the autopilot will fly to the left to resume correct DTK.


Other Available Fields on the Bottom Line

The bottom display line, extreme right field is another variable field used to display other tracking data of
interest to the pilot. The possible data fields displayed are:

GS

Groundspeed, closure speed to the destination waypoint

ETE

Estimated time en-route, in hours and minutes format

ETe

Estimated time en-route, in minutes and seconds format

RNG

Distance from the current “TO” waypoint

(WPT) "TO" waypoint identifier *

(TC)

Digital graphic turn coordinator display *

DIS?

Distance tolerance error indicator

TRN? Turn tolerance error indicator

SPD? Speed tolerance error indicator

TOP

Track Offset Position indicator

VS

Vertical Speed mode indicator**

AH

Altitude Hold mode indicator**

* No associated label field displayed
** Shown if the VNAV servo is on

Each field above except the DIS?, TRN? and SPD? fields is selected by pressing the encoder
pushbutton momentarily. The DIS?, TRN? and SPD? fields are automatically displayed to
indicate GPS data anomalies.


The ETE or Ete label format is selected automatically by the autopilot. The TOP field will not be
displayed if the TOP value is 0.00 (no offset).

Groundspeed (GS)

The GS (groundspeed) field indicates the aircraft speed over
the ground in knots as provided by the host GPS system. This
field has a maximum value of 999 knots per hour.

Advertising