Trio Avionics Pro Pilot - Manual (Page 40)

Trio Pro Pilot Manual 3.8
40
NOTE: There is a provision in the CONFIGURATION menu to incorporate two separate remote
disconnect buttons; one for the H NAV servo and one for the V NAV servo. This setting will also
provide independent PCS capabilities to each axis.
For safety reasons, the pilot should consider a single remote disconnect button to disconnect
both servos with a single click. While provisions has been made for two remote disconnect
buttons that will allow separate horizontal and vertical functions (including PCS), this should be
employed only when the user has an overriding need for separate control.
In this case, it will be necessary to press EACH button to disconnect
the respective servo in an emergency situation.