TruTrak EFIS AP (8300-057C) - Manual (Page 32)

AP III Quick Reference
Button labels
– White - mode is OFF, Green - mode is ON
Click – Momentarily push and release any knob or button
Press – Push and hold any knob or button for 2 seconds and release
TruTrak Flight Systems 30 EFIS Autopilot Installation Manual
Basic Operation
Basi tion
b to enter setup mode
Rotate right kn r setting
Dimmer function sired brightness
Arrival Transition – Click CRS
Rotate left knob to set HSI course pointer to selected runway direction
Click APPR
NOTES
AP IV Quick Reference
Enter – Click appropriate knob
Barometer adjust – Rotate right knob
Track bug adjust – Rotate left knob
ltimete bug adjust A r – Click ALT button, bug will synchronize to nearest 100 feet
ob to select new altitude Rotate right kn
Push Enter
cel Altimeter bug can – Click ALT button
immer function D – Click left knob to enter setup mode
b to set desired brightness Rotate left kno
Push Enter
Nav mode – Click NAV button
av mode cancel – Click NAV button or rotate left knob (Track bug adjust) N
c Autopilot and Flight Director Opera
Autopilot on / off – Click AP–FD button – on, Click AP–FD button - off
r on / off tton – on, Press AP–FD button - off Flight Directo – Press AP–FD bu
t Track selec – Rotate left knob
Nav mode – Click NAV button
ncel Nav mode ca – Click NAV button or rotate left knob (Track select)
ug will synchronize to nearest 100 feet Altitude select – Click ALT button, b
Rotate right knob to select new altitude Push Enter (Initial VS is +/- 500 FPM)
ob Vertical speed adjust – Rotate right kn
arometer adjust – Click right kno B
ob to adjust baromete
Push Enter
– Click left knob to enter setup mode. Rotate left knob to set de
Push Enter
Arrival Transition
same regardless of AP or FD being on or off) (Note: Operation is the
April 2009 8300-057 Rev D