Figure 2, Figure 3 – Tuffy Security 089 Manual User Manual
Page 2
Page 2 of 3 - 3/29/2010 – Rev122006
Figure 2
2.3. The arrows on the screws are pointing in the direction which the previous codes were set to. (See Figure 3)
IMPORTANT: Open knob must be in LOCKED position before the code can be changed.
2.4. Use a small screwdriver to rotate the arrows. For each number in your combination, apply light pressure and
rotate a half turn so that the arrow points correctly (SET ON) and snaps up. Be sure to reset all the arrows to
SET OFF before entering the new combination. (See Figure 3)
2.5. Check to make sure that the arrow of any number that is not in the combination is pointing the correct direction
(SET OFF). (See Figure 3)
CAUTION: Arrows must point either direction (SET ON or SET OFF). An arrow pointing differently indicates
that it has not snapped up, the combination will not work. Test the combination before locking the drawer.
Figure 3