USL JSD-80 Manual - Manual (Page 8)

USL, Inc. JSD-80 Instruction Manual Page 8 3rd Edition. February, 2006
EC Declaration of Conformity
Meets intent of Directive 89/336/EEC for
Electromagnetic Compatibility and Low-
Voltage Directive 73/23/EEC for Product
Safety. Compliance was demonstrated to
the following specifi cations as listed in
the Offi cial Journal of the European Com-
munities:
EN 55022 Conducted Emissions, EN 55022
Radiated Emissions: Class A Limits
EN 55024 Immunity:
EN61000-4-2 Electrostatic Discharge Im-
munity
EN61000-4-3 RF Electromagnetic Field Im-
munity
EN61000-4-4 Electrical Fast Transient/
Burst Immunity
EN61000-4-5 Power Line Surge Immunity
IEN61000-4-6 Conducted RF Immunity
EN61000-4-7 Voltage Dips, Short Interrup-
tions and Variations
Certifi cations
Low Voltage Directive 73/23/EEC:
EN
EN60950 Information Technology,
Video and similar Electronic Apparatus
Safety Requirements
IEC 60950
CE, UL, cUL Safety and Overall Compli-
ance
VDE Certifi ed Power Cords
Pollution
Not intended for environments where con-
ductive pollutants may be present.
Equipment Class
Class III Equipment: Equipment in which
protection against electrical shock relies
upon supply from SELV circuits (Safety
Transformer) and in which hazardous
voltages are not generated. Insulation and
protective fusing are used in addition to
these criteria.
Equipment Type A: Equipment that is
intended for connection to the building
power supply wiring via non-industrial
plugs and sockets or via appliance cou-
plers or both.
1.5 Declaration of
Conformance, CE