VACUUBRAND DVR 2 User Manual
Page 2
Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully
the validity of this document with respect to his product. manual-no.:
999001 / 04/04/2012
Dear customer,
Your VACUUBRAND vacuum gauge shall support you at your work for a long time without any trouble
and with full load output. Thanks to our large practical experience we attained much information how you
could add to an efficient application and to personal safety. Please read these instructions for use prior
to the initial start-up of your controller.
VACUUBRAND vacuum gauges are the result of many years of experience in construction and practi-
cal operation of these vacuum gauges combined with the latest results in material and manufacturing
technology.
Our quality maxim is the „zero fault principle“: Every vacuum gauge leaving our company, is tested in-
tensively including an endurance run. Therefore faults, even those which occur rarely, are identified and
can be eliminated immediately. The achievement of the specifications after the endurance run is tested
for every device.
Every VACUUBRAND device achieves the specifications.
We are committed to providing our customers with this high quality standard.
We know that the device cannot replace all of your real work and hope that our products contribute to
an effective and trouble-free realisation of your work.
Yours
VACUUBRAND GMBH + CO KG
After sales service:
Contact your local dealer or call +49 9342 808-5500.
The document ”Safety information for vacuum equipment” is part of this
manual! Read the ”Safety information for vacuum equipment” and observe
the instructions contained therein!
Trademark index:
VACUU•LAN
®
(US-Reg.No 3,704,401), VACUU•BUS
®
, VACUU•CONTROL
TM
, chemistry-HYBRID
TM
, Peltronic
®
,
TURBO•MODE
TM
, VARIO
®
, VARIO-SP
TM
, VACUUBRAND
®
(US-Reg.No 3,733,388) and also the shown com-
pany logos are trademarks of VACUUBRAND GMBH + CO KG in Germany and/or other countries.