VICI D-4-I-VA38-R - Manual (Page 7)

3
Components of the Detector System
Components of the detector system are listed in the Table 1. Check the
contents of the packages to verify that everything is present. Contact the
factory if anything is missing or damaged. (NOTE: damaged shipments
must remain with the original packaging for freight company inspection.)
Table 2 lists additional required items which must be purchased from Varian.
Introduction
Description Quantity Product number
Detector cell, PDHID 1 PD-D4-I-RU
Pulse supply module 1 PD-M2
Instruction manual 1 MAN-PDD4-VA
Varian fittings kit 1 PD-KIT-VA
Includes: 1/32" polyimide ferrule 5 ZF.5V
1/16" gold-plated ferrule 5 ZF1GP
0.25 - 0.44 mm polyimide column ferrule 5 FS.4
0.4 - 0.5 mm polyimide column ferrule 5 FS.5
1/16" union, 316 SS 2 ZU1MS6
1/16" cross 1 ZX1
1/8" external to 1/16" internal adapter 2 EZR21
1/8" external to 1/16" internal reducing union 2 EZRU21
1/16" to 1/16"bulkhead union 2 ZBU1
1/32" external nut 1 EN.5KN
Packed column adapter (installed) 1 I-23642-D4RU
Restrictor, 35 cc/min @ 80 psi He 1 TGA-R-35F80P
Clamp ring 1 CR1
Helium purifier 1 HP2
Electrometer cable assembly, Varian 1 I-23230
Bias cable assembly, Varian 1 I-23404-1
Pulser cable assembly, Varian 1 I-23628
Heater block, Varian 1 I-23755
Table 1: Components of the D-4-I-VA38-R system
Description Quantity Varian Product number
Detector mounting base 1 03-925326-01
Mounting base screws 4 12-901163-00
Heater (depending on requirement) 1
120V 03-925396-01
220V 03-925396-02
101V 03-925396-03
Temperature probe 1 03-925374-01
Electrometer board 3800 FID 1 03-925021-01
Table 2: Components not supplied by Valco (may be obtained from Varian)