Vt8300 series user interface guide, Parameter details screen 1/7 – Viconics VT8300 Low Voltage User Interface Guide User Manual
Page 17
17
VT8300 Series
User Interface Guide
Viconics Technologies Inc.
|
9245 Langelier Blvd.
|
St.-Leonard
|
Quebec
|
Canada
|
H1P 3K9
|
Tel: (514) 321-5660
|
Fax: (514) 321-4150
028-0427-01
www.viconics.com
|
November 2014
©
2
01
4 V
ic
onic
s T
ec
hno
lo
gi
es
Inc
. A
ll r
ig
ht
s r
ese
rv
ed
.
PARAMETER DETAILS SCREEN 1/7
Configuration Parameters Default Value
Significance and Adjustments
UI 19
Universal input no.3 configuration
Default value = None
Universal Input No. 3
None: no function associated with input though input can be used
for remote network monitoring.
COC/NH: change over dry contact. Normally heat used for hot/cold
water or air change over switching in 2 pipe systems.
COC/NC: change over dry contact. Normally cool used for hot/cold
water or air change over switching in 2 pipe systems.
COS: change over sensor. Used for hot/cold water or air change over
switching in 2 pipe systems.
Occupancy cmd
Default value = Local
Occupancy Command
Loc Occ: occupancy is determined by local sequences.
Occupied: force occupied mode.
Unoccup: force unoccupied mode.