Setup & installation – WaterChef U9000 User Manual
Page 5
3
www.waterchef.com
SETUP & INSTALLATION
1. Open the shipping carton, remove all System parts and place
them on your kitchen counter.
2. Compare them with the parts shown in this guide to be certain
all items were included (see inside front cover).
3. The type of plumbing that you have in your home will determine
the method of installation and type of hardware that will be used.
4. Following is a list of common tools required for most
under-counter installations:
Drilling a Hole in a PORCELAIN/CERAMIC Sink
(fig. A)
:
3/8” Electric Drill
5/8” Carbide Masonry Drill Bit
5/8” High Speed Drill Bit
Hammer
Punch
Masking Tape
Drilling a Hole in a STAINLESS STEEL Sink
(fig. B)
:
3/8” Electric Drill
5/8” High Speed Drill Bit
1/8” High Speed Drill Bit
Hammer
Punch
Masking Tape
Installing the 3/8” T-Valve and Faucet
(fig. C)
:
5/8” or 1/4” Open Ended Wrench (varies by model)
Knife
INSTALLATION QUESTIONS?
Call WaterChef Customer Care:
1.800.879.8909
(int’l +1.775.359.9500)
(MON - FRI, 8 AM - 5 PM PST)
1
1
1
4
4
2
2
2
5
5
3
3
6
6
A
B
C
2
1
2
4
6
1
5
3
2
4
6
1
5
3