Wiko MINZ+ - Manual (Page 29)

language, input method, display, shortcuts, bri-
ghtness and backlighting, etc.
Shortcut : Dedicated keys assign a function to the na-
vigation keys. You can then run the function from the
home screen by pressing on the key.
If you assign the shortcuts function to a key, a short-
cuts list will appear when you press the key from
the home screen. This can be modified in Phone
settings-shortcuts, where you can add, delete and
change the order of all the shortcuts available for
the phone.
Network configurations – SIM1/SIM2 – Defining the
network profile:
If you forgot to select your operator when you turned
on the phone for the first time, select the network
profile again here.
If you are unable to find your network service operator
in the list, please refer to the Mobile Internet section
so that you can configure it manually.
Security configurations protect the phone in various
ways : PIN codes, locking the phone each time it starts
up and automatic screen lock.
◊ The default lock code is 1234.
Restoring factory settings You must enter the appro-
priate lock password for the phone (the default is 1234)
then press on Ok to restore the factory settings.
USB Configuration
When your phone is connected to a PC using a PC data
cable , you can activate the External Storage function
and use the phone as a removable disk.