Wilkerson M30 - Manual (Page 2)

REPAIR KITS AND REPLACEMENT PARTS
Bowl O-Ring Kit (nitrile) – 10 per kit .................................. GRP-95-256
Bowl O-Ring Kit (Fluorocarbon) – 10 per kit ...................... GRP-95-942
Filter Element Repair Kits:
Type D Element Kit ........................................................ MXP-95-532
Type C Element Kit ........................................................ MTP-95-551
Type B Element Kit ........................................................ MSP-95-992
Flex-Drain™ ........................................................................ FRP-95-610
Automatic Drain (w/ nitrile Seals) ...................................... GRP-95-973
Automatic Drain (w/ Fluorocarbon Seals) .......................... GRP-95-981
Plastic Bowl Kits:
Plastic Bowl Only ........................................................... GRP-95-871
w/Flex-Drain™, Fluorocarbon Seals .............................. MRP-95-943
w/Flex-Drain™, Bowl Guard .......................................... MRP-95-944
w/Automatic Mechanical Drain, Fluorocarbon Seals
and Bowl Guard .............................................................
MRP-95-742
Bowl Guard for Plastic Bowl .............................................. GRP-95-808
Metal Bowl Kits:
Bowl Assembly w/Automatic Mechanical Drain
(Fluorocarbon Seals) .....................................................
GRP-95-970
Clamp Ring Assembly ....................................................... GRP-96-404
Differential Pressure Indicator ............................................ DP2-01-000
PRESS
TuRn
O-RInG
DIFFEREnTIAL
PRESSuRE
InDICATOR
BODY
GASKET
COALESCInG
ELEMEnT
BOWL
InSERT
(Metal Bowls Only)
O-RInG
METAL
BOWL
InSERT
RETAInER
PETCOCK
FLEX-
DRAIn™
(Plastic Bowls
Only)
AuTOMATIC
MECHAnICAL
DRAIn
PLASTIC
BOWL
nuT
BOWL
GuARD
CLAMP
RInG
ASSEMBLY
O-RInG
Coalescing Filter Model M30 with Variations and Accessories 83-708-000
MAINTENANCE
1. The element operates effectively when it is saturated. The element's
useful life will end only when the resistance to flow becomes too high
or the maximum permissible pressure is reached. The element cannot
be cleaned or reused and must be replaced at the end of its useful
life.
2. When bowl becomes dirty, replace the bowl or clean by wiping with a
clean, dry cloth.
3. Before placing the unit in service, make sure that the bowl and bowl
guard are securely locked in place.