Wilkerson warranty – Wilkerson X25 User Manual

Page 6

Advertising
background image

6

Customer/Technical Service
Pneumatic Division
Richland, MI 49083

Tel: (269) 629-2550
Fax: (269) 629-2475

wilKerson warrantY

Wilkerson products are warranted to be free from defects in material

and workmanship, under proper use, installation, application and

maintenance in accordance with Wilkerson's written recommendations

and specification for a period of one year from the date of shipment from

the factory (refrigerated dryers are warranted for 2 years). Wilkerson's

obligation under this warranty is limited to, and the sole remedy for any

such defect shall be, the repair or replacement (at Wilkerson's option)

of unaltered products returned to Wilkerson and proven to have such

defect, provided such defect is promptly reported to Wilkerson within

said one-year period.

This is the only authorized Wilkerson Warranty and is in lieu of all

other express or implied warranties or representations, including

any implied warranties of merchantability or fitness, or of any

other obligations on the part of Wilkerson.

Warranty claims must be submitted and shall be processed in

accordance with Wilkerson's established warranty claim procedure.

In no event will Wilkerson be liable for business interruptions, loss of

profits, personal injury, costs of delay or for any other special, indirect,

incidental or consequential losses, cost or damages.

WARNING: USE LIMITATIONS

Wilkerson's warranties are void, and Wilkerson assumes no

responsibility for any resulting cost, loss, injury or any other damages

whatsoever, with respect to any plastic bowl unit for which a bowl

guard is standard equipment if the unit is placed in service without the

bowl guard and, except as otherwise specified in writing by Wilkerson,

with respect to any Wilkerson products which are used in other than

compressed air service. Specific warnings with respect to these and

other use limitations appear elsewhere in this catalog.

Wilkerson maintains a policy of ongoing product development

and improvement. We therefore reserve the right to change

dimensions specification and design without notice.

do not place plastic bowl unit in service

without bowl guard installed

Plastic bowl units are sold only with bowl guards with the exception

to miniature units (C04, F00, L00, and M00). To minimize the danger

of flying fragments in the event of plastic bowl failure, the bowl guards

should not be removed. If the unit is in service without the bowl guard

installed, manufacturer's warranties are void, and the manufacturer

assumes no responsibility for any resulting loss.

If the unit has been in service and does not have a bowl guard,

order one and install before placing back in service.

CAUTION

Certain compressor oils, chemicals, household cleaners, solvents,

paints and fumes will attack plastic bowls and can cause bowl failure.

Do not use near these materials. When bowl becomes dirty replace

bowl or wipe only with a clean, dry cloth. Reinstall bowl guard or buy

and install a bowl guard. Immediately replace any crazed, cracked,

damaged or deteriorated plastic bowl with a bowl or a new plastic bowl

and bowl guard.

CAUTION

Except as otherwise specified by the manufacturer, this product is

specifically designed for compressed air service, and use with any

other fluid (liquid or gas) is a misapplication. For example, use with or

injection of certain hazardous liquids or gases in the system (such as

alcohol or liquid petroleum gas) could be harmful to the unit or result

in a combustible condition or hazardous external leakage. Before using

with fluids other than air, or for non-industrial applications, or for life

support systems, consult Wilkerson Corporation for written approval.

SOME OF THE MATERIALS THAT WILL ATTACk

POLYCARBONATE PLASTIC BOWLS.

Acetaldehyde

Chlorobenzene

Methylene chloride

Acetic acid (conc.)

Chloroform

Methylene salicylate

Acetone

Cresol

Milk of lime (CaOH)

Acrylonitrile

Cyclohexanol

Nitric acid (conc.)

Ammonia

Cyclohexanone

Nitrobenzene

Ammonium fluoride

Cyclohexene

Nitrocellulose lacquer

Ammonium hydroxide Dimethyl formamide

Phenol

Ammonium sulfide

Diozane

Phosphorous hydroxy

Anaerobic adhesives

Ethgane tetrachloride

chloride

and sealants

Ethyl acetate

Phosphorous trichloride

Antifreeze

Ethyl ether

Propionic acid

Benzene

Ethylamine

Pyridine

Benzoic acid

Ethylene chlorohydrin

Sodium hydroxide

Benzyl alcohol

Ethylene dichloride

Sodium sulfide

Brake fluids

Ethylene glycol

Styrene

Bromobenzene

Formic acid (conc.)

Sulfuric acid (conc.)

Butyric acid

Freon (refrig. & Propell.) Sulphural chloride

Carbolic acid

Gasoline (high aromatic) Tetrahydronaphthalene

Carbon disulfide

Hydrazine

Tiophene

Carbon tetrachloride

Hydrochloric acid (conc.) Toluene

Caustic potash solution Lacquer thinner

Turpentine

Caustic soda solution

Methyl alcohol

Xylene

Perchlorethylene

& Others

TRADE NAMES OF SOME COMPRESSOR OILS, RUBBER

COMPOUNDS AND OTHER MATERIALS THAT WILL ATTACk

POLYCARBONATE PLASTIC BOWLS.

Atlas “Perma-Guard”

National Compound #N11

Buna N

“Nylock” VC-3

Cellulube #150 and #220

Parco #1306 Neoprene

Crylex #5 cement

*Permabond 910

*Eastman 910

Petron PD287

Garlock #98403 (polyurethane)

Prestone

Haskel #568-023

Pydraul AC

Hilgard Co.'s hil phene

Sears Regular Motor Oil

Houghton & Co. oil #1120,

Sinclair oil “Lily White”

#1130 & #1055

Stauffer Chemical FYRQUEL #150

Houtosafe 1000

Stillman #SR 269-75 (polyurethane)

Kano Kroil

Stillman #SR 513-70 (neoprene)

Keystone penetrating oil #2

Tannergas

*Loctite 271

Telar

*Loctite 290

Tenneco anderol #495 & #500 oils

*Loctite 601

Titon

*Loctite Teflon-Sealant

*Vibra-tite

Marvel Mystery Oil

Zerex

Minn. Rubber 366Y

*When in raw liquid form.

We cannot possibly list all harmful substances, so check with

Mobay or the General Electric office for further information on

polycarbonate plastic.

The trade names “EconOmist” and “Flow-Guide”

are registered at the United States Patent Office.

“Auto-Fill”, “Dial-Air”, “Flex-Drain”, “Mainliner” and

“Whirl-Flo” are trade names of the Wilkerson Corporation.

WILkERSON PRODUCTS ARE PROTECTED BY THE
FOLLOWING U.S. PATENT AND PATENTS IN OTHER

COUNTRIES, ADDITIONAL PATENTS ARE PENDING.

3,631,878

3,667,493

3,762,224

4,215,790

4,215,790

3,793,803

4,718,245

3,793,803

3,858,403

D-292-310

D-229-629

4,215,790

4,289,335

4,352,511

4,559,065

4,631,073

4,689,969

4,696,320

3,889,484

3,945,465

4,631.073

D-234-848

Advertising
This manual is related to the following products:

X04, X03, X06