Wilson Audio WATT Series 7 - Manual (Page 51)

Ideally, the speakers should not be positioned too far from the listener, if maximum res-
olution of low level detail is required (near-field monitoring). If possible, the speakers
should be positioned out into the room, slightly asymmetrically away from side and rear
walls. The speakers should be toed-in toward the listener, preferably so that the listener
at his seated position can barely see the surface of the inner side panel of the WATT as
he faces the speaker. It is recommended that a distance of 2-3 feet, and possibly more,
be maintained between the WATT and the rear walls and a distance of at least 1 1/2 feet
be maintained between the front panel of the WATT and reflective side walls. Use of
sound absorbent materials may reduce the space requirement somewhat. Experiment for
each room.
By following the guidelines in this manual and your own common judgement,
your new WATT/Puppy speakers will provide you with a lifetime of pure music repro-
duction.
i
n
y
o u r
r
o o m
3-15
Figure 13