Wilson Audio WATCH Dog Subwoofer Series-2 User Manual
Page 67
67
Section 8.0 - Twelve-Volt Trigger Controls
Certain features of the WATCH Dog are controllable via a series of twelve-volt
triggers. This allows remote control access of
these features by outside control systems,
Audio/Video Controllers, etc. This provides
more convenient and seamless operation of the
WATCH Dog within home theaters and com-
plex audio systems.
The twelve-volt triggers are connected
via standard DC ports located adjacent to the
audio inputs on the rear of the WATCH Dog.
The following features can be switched
between two states: On/Off (Stand By);
Line/Processor; High Pass Filter In/Out; Low
Pass Filter In/Out.
To access control of one of these four
features via its twelve-volt trigger, move the
switch corresponding to that function to the
“Rem” position. The switches for
Line/Processor, High Pass Filter In/Out, and
Low Pass Filter In/Out are located on the main
control panel. The switch for the Stand By
On/Off Feature is located on the rear of the
subwoofer. When a function switch is in the
“Rem” position, that feature can only be con-
troled through the twelve-volt trigger.
Please Note: Only the switches rele-
vant to the features to be remote controlled
should be switched to the “Rem” position.
C o n t r o l l i n g t h e W AT C H D o g
Figure 12