Winco ULPSS90/A WITH BASLER DGC-2020 ENGINE CONTROL - Manual (Page 2)

Page i
TABLE OF CONTENTS
INTRODUCTION i
GUIDE TO PRODUCT SAFETY 1
BASIC INFORMATION 2
Description 2
DGC-2020 Engine Control Layout 3
Specification Table 4
PREPARING THE UNIT 5
Unpacking the unit 5
ENGINE GENERATOR INSTALLATION 5
Installation 6
Fuel Line Installation 6
Fuel Pressure Tables 6
LP Liquid Withdrawal 7
Lubrication 7
Coolant 7
Battery Installation 7
Battery Charger/Block Heater Wiring 8
AC Electrical Connections 8
DC Electrical Connections 9
INITIAL START-UP 11
EXERCISER CLOCK 11
TROUBLESHOOTING INFORMATION 12
LP/NG CONVERSION 11
OUTLINE DRAWING 13
AC WIRING - THREE PHASE
277/480 Volt 14
120/208 Volt 14
120/240 Volt 15
AC WIRING - SINGLE PHASE
120/240 Volt 15
VOLTAGE REGULATOR WIRING 16
DC SCHEMATIC - WIRING DIAGRAM 17
12 MONTH WARRANTY 18
PROPER USE AND INSTALLATION
You must be sure your new engine generator set is:
*
Properly serviced before starting
* Operated in a well ventilated area
* Properly exhausted and gases safely dispersed
* Wired by a qualified electrician
* Operated only for its designed purposes
* Used only by operators who understand its operation
* Properly maintained
SAVE THESE INSTRUCTIONS
This manual contains important instructions that
should be followed during installation and maintenance
of the generator and batteries.
Read and understand all instructions in the manual
before starting and operating the generator set.
USING THIS MANUAL
Congratulations on your choice of a Winco generator set.
You have selected a high-quality, precision-engineered
generator set designed and tested to give you years of
satisfactory standby service.
To get the best performance from your new engine genera-
tor set, it is important that you carefully read and follow the
operating instructions in this manual.
Should you experience a problem please follow the “Things
To Check” near the end of this manual. The warranty listed
in this manual describes what you can expect from WINCO
should you need service assistance in the future.
COPY YOUR MODEL AND SERIAL NUMBER HERE
No other WINCO generator has the same serial number as
yours. It is important that you record the number and other
vital information here. If you should ever need to contact us
on this unit it will help us to respond to your needs faster.
MODEL_____________________________________
SERIAL NUMBER____________________________
PURCHASE DATE____________________________
DEALER____________________________________