User manual, Optima rack 1-3k – XMART Optima-RACK 1K User Manual
Page 4
USER MANUAL
Optima Rack 1-3K
___________________________________________________________________________________________________________________________________
(120217_EN) OPTIMA-RACK 1K-3K
- 7
3. INSTALATION
3.1.- INTERNAL BATTERIES CONNECTION BEFORE INSTALLING
Before installing this product internal batteries must be connected. This product is delivered with internal batteries
disconnected to avoid battery damage during long storage times.
Step 1: Open and remove front cover
Step 2: Connect internal batteries to the UPS
Step 3: Close front panel
USER MANUAL
Optima Rack 1-3K
___________________________________________________________________________________________________________________________________
(120217_EN) OPTIMA-RACK 1K-3K
- 8
3.2.- RACK UPS INSTALLATION
Rack UPS must be installed using L-Shape type guides for supporting UPS weight. Usually this kind of supports is
provided with rack cabinets. If not, XMART can provide telescopic guides as optional accessory.
Small black handles included with the UPS are only for locking purposes. UPS cannot be supported only by these
handles.
-
Figure 1: Rack cabinet must include L-shape guide to support UPS.
-
Figure 2: UPS must be installed on L-shape guides.
-
Figure 3: Handles included with UPS are only for locking UPS to the cabinet but not for supporting
UPS weight.
-
Figure 4: XMART offers telescopic guides as optional accessory if it is required.
Figure 1:
Figure 2:
Figure 3:
Figure 4: