Cabletron Systems SmartSwitch - Manual (Page 306)

Chapter 21: RMON Configuration Guide
306 SmartSwitch Router User Reference Manual
To configure the Filter group,
you must configure both the
Channel and Filter control
tables. rmon channel index <index-number> port <port>
[accept-type matched|failed] [data-control on|off]
[turn-on-event-index <number>] [turn-off-event-
index
<number>] [event-index <number>] [channel-
status ready|always-ready][description <string>]
[owner <string>] [status enable|disable]
rmon filter index <index-number> channel-index
<number> [data-offset <number>] [data <string>]
[data-mask <string>] [data-not-mask <string>] [pkt-
status
<number>] [status-mask <number>] [status-not-
mask <number>] [owner <string>] [status
enable|disable ]
To configure the Etherstats
group. rmon etherstats index <index-number> port <port>
[owner <string>] [status enable|disable]
To configure the Event group. rmon event index <index-number> type
none|log|trap|both [community <string>]
[description <string>] [owner <string>] [status
enable|disable
]
To configure the History
group. rmon history index <index-number> port <port>
[interval <seconds>] [owner <string>] [samples
<num>] [status enable|disable]
To configure the Application
Layer and Network Layer
Host groups. rmon hl-host index <index-number> port <port> nl-
max-entries <number> al-max-entries <number>
[owner <string>] [status enable|disable]
To configure the Application
Layer and Network Layer
Matrix groups. rmon hl-matrix index <index-number> port <port> nl-
max-entries <number> al-max-entries <number>
[owner <string>] [status enable|disable]
To configure the Host group. rmon host index <index-number> port <port> [owner
<string>] [status enable|disable]
To configure the Host Top N
entries. rmon host-top-n index <index-number> host-index
<number> [base <statistics>] [duration <time>] [size
<size>] [owner <string>] [status enable|disable]
To configure the Matrix
group. rmon matrix index <index-number> [port <port>]
[owner <string>] [status enable|disable]
To configure the Network
Layer Matrix top n entries. rmon nl-matrix-top-n index <index-number> matrix-
index <number> ratebase terminal-packets|terminal-
octets|all-packets|all-octets duration <number> size
<number> [owner <string>] [status enable|disable]