Program ae, P. 44 – Canon A540 User Manual
Page 46
44
The camera automatically sets the shutter speed and aperture
value to match the brightness of the subject.
!
When a correct exposure cannot be obtained, the shutter speed and
aperture values are shown in red on the LCD monitor when the shutter
button is pressed halfway. Use the following shooting methods to
obtain the correct exposure and make them show in white
(PowerShot A540 only).
3
Compose the second image so that it
overlaps a portion of the first and shoot.
!
You can press the
or
button to return to the
previously recorded image to retake the shot.
!
Minor discrepancies in the overlapping portions can be
corrected when the images are stitched together.
4
Repeat the procedure for additional images.
!
A sequence may contain up to 26 images.
!
Press the FUNC./SET button after the last shot.
!
You cannot display the images on a TV when shooting in
Stitch Assist mode.
!
The settings for the first image are applied to the second
image onward.
!
Use PhotoStitch, a supplied software program, to merge the
images on a computer.
!
When the
button is pressed, you can switch between the
items which you can set.
- Exposure compensation/Shooting direction selection
Program AE
PowerShot A540
PowerShot A530
- Using the flash
- Changing the ISO speed
- Changing the metering method