Accessing the web page for a phone – Cisco OL-12232-01 User Manual
Page 2
Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Accessing the Web Page for a Phone
8-2
Cisco Unified IP Phone 7970G/7971G-GE for Cisco Unified Communications Manager 6.0
OL-12232-01
•
•
•
Streaming Statistics, page 8-15
Accessing the Web Page for a Phone
To access the web page for a Cisco Unified IP Phone, perform these steps.
Note
If you cannot access the web page, it may be disabled. See the
Enabling Web Page Access” section on page 8-3
for more information.
Procedure
Step 1
Obtain the IP address of the Cisco Unified IP Phone using one of these methods:
•
Search for the phone in Cisco Unified Communications Manager by choosing
Device > Phone. Phones registered with Cisco Unified Communications
Manager display the IP address at the top of the Phone Configuration web
page.
•
On the phone, press the Settings button, choose Network Configuration,
and then scroll to the IP Address option.
Step 2
Open a web browser and enter the following URL, where IP_address is the IP
address of the Cisco Unified IP Phone:
http://IP_address
The web page for a Cisco Unified IP Phone 7970 Series includes these hyperlinks:
•
Device Information—Displays device settings and related information for
the phone. For more information, see the
“Device Information” section on
.
•
Network Configuration—Displays network configuration information and
information about other phone settings. For more information, see the
“Network Configuration” section on page 8-6
.