How to use the audioa^ideo input jacks (continued), How to u, Udio – Philips 27TS54C User Manual
Page 11: Ideo, Nput, Acks, Ontinued
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
How TO U
se
the
A
udio
A^
ideo
I
nput
J
acks
(C
ontinued
)
o
"XZou can view the playback of
X VCR tapes (Video Disc
Players, camcorders, etc), by
using the AUDIO and VIDEO
INPUT jacks (on the rear of the
TV).
For example: to view the play
back of a VCR tape:
Connect the VIDEO and
AUDIO IN(put) jacks on the
TV to the AUDIO and VIDEO
OUT(put) jacks on the VCR.
<3> Press the MENU (M) button
on the remote, then press the
CHANNEL
A
or ▼ buttons to
select the word INPUT with the
TV’s on-screen arrow.
Note: You can press the CHAN
NEL
AW buttons to select
“VCR/AUX” (if it has been
added to the TV’s channel mem
ory.) See page 6 for details.
Press the (+) button to select
the VCR/AUX(iliary) INPUTS
on the rear of the TV.
<J>
IhmtheVCRON
and
PLAY the VCR tape to be
viewed on the TV.
\
/ S
mart
H
ei
.
p
Remember, when you're
® through using the
AN
INPUT jacks, return the INPUT
display screen on the TV to
ANTENNA. If you leave the TV
in the VCR/AUX INPUT mode
and there is no signal source con
nected to the jacks, you will be
seeing only a blank screen on the
TV.
NOTE: If you have a mono (sin
gle audio OUTPUT) VCR, "Y"
Connectors are available (from
your dealer or Parts Information
Center 1 800 292-6066) to con
nect to the audio inputs on the TV.
PICTURE AND SOUND FROM
PLAYBACK OF VCR TAPE
SMART PiCr
SUP.r
SrifiRT SSB
STERE8
DINPUT
CA8LE
RCA PHONO
PLUG CABLES
(NOT SUPPLIED)
AUDIO IN
(RED/WHITE)
(YELLOW) -------
1
woto
©
OUT
©^
—H*- AUP«
© c
BACK OF VCR
VCR
(EQUIPPED WITH VIDEO AND
AUDIO OUTPUT JACKS)
NOTE: THE ''TVATCR" BUTTON
CAN ALSO BE USED TO PLACE
THE TV IN EITHER VCR/AUX
MODE (AS WELL AS SELECT
CHANNELS 3 OR 4.)
11